口罩鋁條熱熔膠過膠機特點有哪些？
口罩鋁條熱熔膠過膠機特點是：
The characteristics of the hot melt adhesive machine for mask aluminum strip are as follows:
1：過膠迅速，可單面或雙面同時過膠
1: Quick glue application, single side or double side glue application at the same time
2：可放置在桌面上，多人同時操作。
2: It can be placed on the desktop and operated by multiple people at the same time.
3：平面上膠，上膠均勻粘性好，滾膠的材質厚度范圍廣（可以通過調節上輥來調節）。
3: On the plane, the glue is evenly sticky, and the material thickness of the roll is wide (it can be adjusted by adjusting the upper roll).
4：機器暢銷10余年機型成熟，經濟耐用。
4: The machine has been selling well for more than 10 years, with mature model and durable economy.
5：寬度也可定制，現貨規格有：300MM，400MM，500MM，600MM，800MM，1米，較大型如1米以上備貨不多，要提前預定。歡迎聯系我們:http://m.e846lbsv.cn
5: Width can also be customized, spot specifications are: 300mm, 400mm, 500mm, 600mm, 800mm, 1M, larger if more than 1m stock is not much, to book in advance. Welcome to contact us: http://m.e846lbsv.cn
(1) 粘接迅速 通常從涂膠到冷卻粘牢,只需要幾十秒,甚幾秒的時間"
(1) It usually takes only tens of seconds, or even seconds, from gluing to cooling and sticking“
(2) 粘接范圍廣 對許多材料,甚對公認的難粘材料(如聚烯烴!蠟紙!復寫紙等)也可以進行粘接。
(2) The bonding range is wide for many materials, even for the recognized difficult to stick materials (such as polyolefin, wax paper, carbon paper, etc.).
(3) 可反復加熱,多次粘接"適合不同的尺寸，
(3) It can be repeatedly heated and bonded "suitable for different sizes,
(4) 性能穩定 便于貯存!運輸"
(4) Stable performance, easy to store and transport“
(5) 生產成本更低廉
(5) Lower production cost
上膠特點：膠面在下
Features of gluing: the glue surface is under
上膠方式：整面上膠 ，加上輥
Gluing method: gluing the whole surface and adding the roller
上膠，寬面積：寬：600，可調，小寬度也可以隨意上膠
Gluing, wide area: width: 600, adjustable, small width can also be glued at will
膠槽及滾輪均可獨立控溫。寬段變速方便大小材料使用
The rubber groove and roller can control the temperature independently. Wide range variable speed for convenient use of large and small materials
應用：主要應用于大面積材質的過膠，一般厚度在0.4—12mm以內均可。
Application: it is mainly used for over sizing of large area materials, and the thickness is generally within 0.4-12mm.
上一篇：改進主動點膠機點膠工藝的2個辦法！
下一篇：自動點膠機為什么有三軸四軸五軸之分？
